FIS is a manufacturer and full-line distributor of communication fiber optics; test equipment, connectors, cable and cable assemblies, tools and tool kits, fiber optic consumable products, Category 5e and 6 cabling products, active network equipment, and fiber optic security systems and components. Deliberant 5M - 2.4GHz Wi-Fi Access Point, 2x2 MIMO, 300Mbps The APC-5M is a versatile, very efficient, and stable 5 GHz access point. This product is equipped with an extreme output power (up to 29 dBm) 802.11n MIMO radio wrapped securely inside a robust IP-65 compliant enclosure with two N-type connectors, suited for wide coverage area applications.
Introduction There may be cases where it is beneficial or even necessary to update the firmware on a device without using the web browser. It is possible to update firmware by using SSH and using the fwupdate command.
This wiki is a walkthrough of getting the image on the device, and then flashing it. Getting the Image on the Device The first step of flashing an image in shell is getting the firmware image on the device. There are two easy ways to do this, SFTP the image to the device, or use wget from the device to download the image from an external source. Windows instructions Step 1. Run WinSCP program.
In the window fill the following lines: Host name – device IP address (default 192.168.2.66) Username – admin Password – device login password (default admin01) Press Login to initiate SSH connection with the device. Note: after pressing Open, warning message may appear. To continue login process press Yes. In the appeared window type username admin and password.
Username – admin Password – device login password (default admin01) Step 5. Type command “ shell” and press enter. Now you are ready to start FW upgrade process Step 6. Navigate to the /tmp directory cd /tmp Step 7. Rename previously uploaded file to “fwupdate.bin” mv DLB-CPE24.v5.23.22.164518.img fwupdate.bin Step 8. Type command “ fwupdate –m” to start firmware upgrade process. Do not power off device during the firmware upgrade process.
Successful upgrade process start is confirmed with message /sbin/fwupdate: About to run firmware update Step 10. After firmware recovery is complete, the device should respond to a ping at its configured IP address.
Linux Instructions Download latest firmware and open Terminal. Rename downloaded firmware to fwupdate.bin. Mv DLBAPC-5M.FWBD-0100.v5.94-2.rt2880.Deliberant.APC.enUS.19.212805Deliberant.5.94-2.47839.FWBD-0100.cfg.img fwupdate.bin Step 2. Copy firmware image to the device /tmp directory. Scp /home/fwupdate.bin [email protected]:/tmp Step 3. Login to the device via ssh.
Ssh [email protected] Username – admin Password – device login password (default admin01) Step 4. Type command “ shell” and press enter. Shell Step 5.
Type command “ fwupdate –m” to start firmware upgrade process.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |